CiscoPPPoE配置:3640路由器接ADSLModem(4)

　　interface FastEthernet0/1

　　no ip address

　　duplex auto

　　speed auto

　　pppoe enable

　　pppoe-client dial-pool-number 1

　　!

　　interface Dialer1

　　ip address negotiated

　　ip access-group 100 in

　　ip mtu 1492

　　ip nat outside

　　encapsulation ppp

　　dialer pool 1

　　dialer vpdn

　　dialer-group 1

　　no cdp enable

　　ppp pap sent-username 1234567 password 0 1234567

　　!

　　ip classless

　　ip route 0.0.0.0 0.0.0.0 Dialer1

　　!

　　no ip http server

　　ip http authentication local

　　ip http timeout-policy idle 5 life 86400 requests 10000

　　ip nat inside source list 1 interface Dialer1 overload

　　!

　　access-list 1 permit any

　　access-list 100 deny

　　access-list 100 deny

　　access-list 100 permit ip any any

　　dialer-list 1 protocol ip permit

　　!

　　control-plane

　　!

　　banner login ^C

　　Cisco Router and Security Device Manager (SDM) is installed on this

　　device.

　　This feature requires the one-time use of the username "cisco"

　　with the password "cisco".

　　Please change these publicly known initial credentials using SDM or the

　　IOS CLI.

　　Here are the Cisco IOS commands.

　　username privilege 15 secret 0

　　no username cisco

　　Replace and with the username and password you

　　want to use.

　　For more information about SDM please follow the instructions in the

　　QUICK START